Thursday, October 14, 2010

How to: Repair Chinese Apad - Android Tablet

Problem: Chinese Android tablet hangs on boot. Android logo appears and then freezes. It shuts down after few seconds.

Reason: The Android installation is corrupted.

Solution: Reflash / install a new android firmware / OS.

Applies to: Flytouch Android Tablet, Epad, Apad, Iped

The one I repaired has the following specifications:
  • VIA chipset 8505 / 300 mhz
  • 256 mb memory
  • 2 GB storage
  • with camera
  • vibrates at startup (unique for flytouch model)
Pics:



What you need:
At least 128 mb microSD card

Step-by-step Guide:
1. Download this file if you have the 256 mb version: http://www.filefront.com/17277089/EPAD256.1.988.3k.7z


2. Extract the script folder to your memory card. If your memory card is drive e, it should look like these: e:\script\

3. While the tablet is off, insert the card to the card reader /slot at the bottom of your tablet.

4. Turn it on and wait for instructions. It will say when to remove the memory card.

5. The unit will turn off. Turn it on again. That's it. You should see the Android logo by now and wait for it to boot.

If the unit won't turn on after flashing, it means that you used the wrong firmware. Download other firmware for your Android Tablet.

For detailed instructions regarding ROM flashing: Go here


52 comments:

  1. i used the links given but the rom for the 128 doesn't seem compatible with my epad. Now the thing won't work. Help

    ReplyDelete
  2. It really is frustrating when a computer already hangs just as it is starting to boot. Thanks a lot for your very helpful blog post.

    ReplyDelete
  3. I'm just curious, why was there an Android installation error in the first place? Isn't it that the APad (Android Tablet) is installed with Android OS upon purchase? Does it mean that the error came from the factory? Hmm...

    ReplyDelete
  4. it didnt work for me :( can anybody pls help me...

    ReplyDelete
  5. my apad android2.2 always shows something like this "THE PROCESS.COM.PROCESS.MEDIA HAS STOPPED UNEXPEDTELY.PLS TRY AGAIN." how can i repair this sir/madam? what are the remedies for this? pls contact me at my e-add tahirihritarita@yahoo.com pls help me to repair.

    ReplyDelete
  6. thanks a lot for the help
    my tablet is working again....
    (NOTE: you have to format your micro sd before copying the file)
    thanks again for the help :)

    ReplyDelete
  7. "2. Extract the script folder to your memory card. If your memory card is drive e, it should look like these: e:\script\

    3. While the tablet is off, insert the card to the card reader /slot at the bottom of your tablet.

    4. Turn it on and wait for instructions. It will say when to remove the memory card.

    5. The unit will turn off. Turn it on again. That's it. You should see the Android logo by now and wait for it to boot.

    If the unit won't turn on after flashing, it means that you used the wrong firmware. Download other firmware for your Android Tablet."

    I JUST PUT MY MICRO SD MEM WHEN THE ANDROID IS OFF THEN I TURN IT ON WHOLA IT'S WORKING AGAIN!!!

    ReplyDelete
  8. I have followed the instructions for the 256mb, but when i turned on the device, the android logo came up and froze...

    ReplyDelete
  9. Please help !!!!!!
    I bought one of these chines Apads and now after a couple of days of use the screen is not responding to my touch any one know what that could be ?

    ReplyDelete
  10. help my apad doesnt work after flashing to the files attach hereplease help me tia!

    ReplyDelete
  11. I tried both of them but it just ends up saying Sorry! Process system is not responding. Pls help

    ReplyDelete
  12. i flash my tablet, but still problems with WIFI:"unable to scan for networks". please help

    ReplyDelete
  13. @abdel, go to settings and see the manual on how to rest to factory settings then try to connect the wifi and see it will connect again

    ReplyDelete
  14. Hi all, I'm attempting the process with the 256 MB version. I started the tablet with the SD card containing the script folder and for quite some time all I see is the Android logo and the OS version in the bottom right: Android2.2.

    How long should the process take? Is what I'm seeing normal?

    ReplyDelete
  15. I have had my apad since January and now it will not turn on. Any suggestions. I see the red light when I plug it to charge but it will not turn on.

    ReplyDelete
  16. how can i know the version of my slate??if it uses 128 or 256 pls help

    ReplyDelete
  17. what if the version of my epad is 512mb? can I use the 256mb version?

    ReplyDelete
  18. i have an MID apad which uses android 2.2. can i use the 256 mb version link here?

    ReplyDelete
  19. Does anyone know where the reset button is on this?

    ReplyDelete
  20. HI, i just bought my aPad this january and its wifi settings does not connect anymore. The device still picks up the signal but at the end disconnects instead of connecting. how do i fix it? please help!!

    ReplyDelete
  21. I have a tablet pc with an android 2.2 OS and it has a small hole for a reset button if I reset it will the robot flash again? its from mayways China electronics and 258 ram

    ReplyDelete
  22. sir / madam

    san po pwede
    mag pagawa ng
    power botton lumubog po
    kc

    email nyo po pwede po yan s fb at yahoo mail
    nhel2611@yahoo.com
    THNKS PO S INYO

    ReplyDelete
  23. asar umaga nagana xia tas ng knakabihan ,nailaw naman ung blue ibig sabihin bukas xia pero walang display sa lcd , hay pano to

    ReplyDelete
  24. When everytime i chhose the icon and press it , it was a moment snow apperance when jumping to next page . When the snow apperance appear, the screen was back to normal when i put some power to knock IT at the back . What is the problem of this . Thanks .

    ReplyDelete
  25. Can the back case be removed from the android tablet.

    ReplyDelete
  26. its not working in apad android 2.2 froyo :( help me pls

    ReplyDelete
  27. how long will the rebooting process to take?? approximately...how many hours? please help...thanks.

    --kim

    ReplyDelete
  28. I tried resetting my kingcom joypad 81 to it's factory setting. One day na nakalipas di pa rin sya natatapos... anu ba dapat kunf gawin? help naman please

    ReplyDelete
  29. @raivenne

    One day na? It means, di compatible yung niloload mong file. It should not take 30 minutes to complete.

    ReplyDelete
  30. So anu po dapat kung gawin... 3 days na po nasa ganung state pa rin sya... pa help namn po

    ReplyDelete
  31. android operating system

    Hi, i have Apad tablet pc from china , having problem when i am starting tablet pc , its got hang.

    Pls let me know how to fix it.

    ReplyDelete
  32. sir help me .. my tablet pc show a msg like this (Factory data restoring , please wait .. ) please help sir /madam T_T

    ReplyDelete
  33. sir/madam .. please help me my tablet pc show a msg like this "FACTORY DATA RESTORING , PLEASE WAIT .. " please help me sir/madam .. T_T

    ReplyDelete
  34. see memory card bottom reset button prss reset button wait one minitue problem solved

    ReplyDelete
  35. When I boot my APAD, the logo didn't move.. How can i fixed it? Please help.... Thanks...

    ReplyDelete
  36. When I boot my APAD, the logo didn't move.. How can i fixed it? Please help.... Thanks...

    ReplyDelete
  37. wow- I'm not alone. My tablet will boot and run some software, but I get a 'force close' message on things like the calendar and GPS and contacts.
    I don't have a slot in my computer for the tiny card - can it be fixed by downloading something onto a USB stick???
    any advice would be appreciated.

    ReplyDelete
  38. my tablet always hang at "Upgrading file-system ... please wait"

    any solution?

    ReplyDelete
  39. every time i turn on my Google android tablet 7 inch it does not go to the home page it just stay on the cartoon android and it don't move from that spot what should i do guys.

    ReplyDelete
  40. have an epad it was working no problem it fell on the floor and when i plang the charge it wont charge but the charge is working pleas help me so i can fix it :(

    ReplyDelete
  41. Kindly some one help me that how can i upgrade my Chinese made tablet Pc from android 1.6 to 2.1. I already tried an upgrade but it still says android version 1.6. Would anyone be kind enough to guide me how can i install a fresh copy of android 2.2 on my Tablet.

    ReplyDelete
  42. I have the exact same model as that shown in the pictures. The Android robot is frozen upon start-up. I've followed the directions as well as appreciated Grascia's comments. Nothing happens. It is as if the pad will not read the card. I've reset the pad (paper clip into small hole near center on long side between the microphone and the Volume button), and tried again. No avail. I would appreciate suggestions.

    ReplyDelete
  43. Help. My Tablet hang on startup

    ReplyDelete
  44. please help my tablet alway show
    "sorry
    process system is not responding"

    what should i do??

    ReplyDelete
  45. help me .. ung android tablet ko na MID .. nag reverse ung touchscreen .. pag nag left ako ung right ung nagco2respond ! pag up ung down naman ,, panu to /??! help me plz !!

    ReplyDelete
  46. sir dead link na po yung pag dl ng firmware meron po ba bagong link? ty

    ReplyDelete
  47. I just bought my epad. When i turn on the logo doesn't move pls help..jen

    ReplyDelete
  48. I cant believe so many are facing the same problem, Mine wont move from the Android logo from day one, its just junk... i will try this step and hope it works...

    ReplyDelete
  49. do i need a SD card to flash? can i just not use a pen drive and connect using the connector???

    ReplyDelete
  50. Paano repair iyong lumubog na power button ng APAD?

    Thanks

    ReplyDelete